Bosch DCN Next Generation Installation & User's Instructions page 71

DCN Next Generation | Installation and User Instructions | Central Devices
8.10.12 Intercom
Use the menu items in the 7E Intercom sub-menu to
identify the location of the chairman and the operator
(refer to table 8.32 and section 8.8.6).
table 8.32: Intercom sub-menu (* = default)
Menu item
7Ea Assign
7Eb Assign
8.10.13 De-init
Use the 7J De-initialize sub-menu item in the 7J De-Init
menu to erase the addresses of the contribution devices
and the interpretation devices (refer to table 8.33 and
section 8.7).
table 8.33: De-init sub-menu (* = default)
Menu item
7J De-initialize
8.10.14 Defaults
Use the Defaults sub-menu to set all parameters to the
default values in the configuration menu (refer to table
8.34).
table 8.34: Defaults sub-menu (* = default)
Menu item
7L
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter
Operator
Chairman
Parameter
Are you sure?
Parameter
Reset to defaults?
Value
No*
Yes
No*
Yes
Value
No*
Yes
Value
No*
Yes
en | 71
Description
Does not start the assign
operator procedure.
Starts the assign operator
procedure.
Does not start the assign
chairman procedure.
Starts the assign
chairman procedure.
Description
Does not erase the
addresses.
Erases the addresses.
Description
Does not put back the
default values.
Sets all parameters to the
default values. This
includes the values of the
parameters of the
interpreter desks. The
name and the CCU ID are
not changed. The CCU is
also restarted.