Bosch DCN Next Generation Installation & User's Instructions page 118

DCN Next Generation | Installation and User Instructions | Central Devices
12.5.9 Setup
Use the 4 Setup menu item to open the Setup
sub-menu. Use the menu items in this sub-menu to
configure the digital audio expander (refer to table
12.13).
Note
To open the Setup sub-menu, you must
push and hold the knob for more than 3
seconds.
table 12. 1 3: Setup sub-menu (* = default)
Menu item
4A AGC
4B Output Mode
4C Routing
4D Unit Name
4E Defaults
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter
Input:
Input 1L
Input 1R
Input 2L
Input 2R
Output:
Output 1
Output 2
Input/output:
Input 1L
Input 1R
Input 2L
Input 2R
Output 1L
Output 1R
Output 2L
Output 2R
---
---
Value
AGC:
On, Off
On, Off
On, Off
On, Off
Format:
AES/EBU*, SPDIF
AES/EBU*, SPDIF
Channel:
--*, 00 to 31
--*, 00 to 31
--*, 00 to 31
--*, 00 to 31
--*, PA, 00 to 31
--*, PA, 00 to 31
--*, PA, 00 to 31
--*, PA, 00 to 31
Name:
Digital Expander*
Custom name
---
en | 118
Description
Sets the automatic gain
control (AGC) of the
audio inputs on and off
(refer to section 12.5. 1 1).
The format of the digital
audio for audio output 1
and audio output 2.
The channel that is
attached to the audio
input or audio output of
the digital audio expander.
(PA = public address
system.)
The name of the audio
expander (max. 16
characters).
Opens the Reset menu
item (refer to section
12.5. 1 0).