DCN Next Generation | Installation and User Instructions | Central Devices
11.4
External connections
11.4.1 Optical network
Connect the optical network sockets of the audio
expander to the optical network with optical network
cables (refer to figure 11.3).
figure 11.3: Optical network
table 11.2: Optical network connections
Number of connections:
2x proprietary sockets
Location:
Rear side
Nodes:
1
Power consumption:
7.6 W
Bosch Security Systems | 2007-02 | 9922 141 70525
11.4.2 Headphones
You can connect headphones to the headphones socket
of the audio expander. The headphones must have a
3.5 mm plug (refer to figure 11.4).
figure 11.4: 3.5 mm headphones plug, connection
table 11.3: 3.5 mm headphones plug, connection
Number
1
2
3
Note
You can also connect mono headphones to the
headphones socket.
You can select the signal that is available on the
headphones socket with the configuration menu (refer
to section 11.5.6).
en | 98
2 3 1
Signal
Left
Common
Right