Bosch DCN Next Generation Installation & User's Instructions page 92

DCN Next Generation | Installation and User Instructions | Central Devices
10.10.7 Treble
Use the 3 Treble menu to set the level of the treble of
the loudspeakers of the contribution devices (refer to
table 10.16).
table 10. 1 6: Treble sub-menu (* = default)
Menu item
3 Treble
10.10.8 Fault Status
Use the 4 Fault Status menu item to see the condition of
the network controller. If there is more than one
message, the display shows the most important message
(refer to table 10.17).
table 10. 1 7: Messages (low to high importance)
Messages
No Fault
CCU Missing
Incompatible SW
10.10.9 Monitoring
Use the 5 Monitoring menu item to open the Monitoring
sub-menu (refer to table 10.18).
table 10. 1 8: Monitoring sub-menu (* = default)
Menu item
5 Monitoring
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter
---
Description
The network controller operates correctly.
This message is shown if the NCO detects that a CCU is lost.
This message is shown if the NCO detects incompatible software versions between
master and one or more slave CCUs.
Parameter
Signal:
None*
Floor
Input 3
Input 4
Output 1
Output 2
Output 3
Output 4
Value
-12 to 12 dB (0 dB*)
Value
Volume level:
Mute, -31 to 0 dB (-16 dB*)
Mute, -31 to 0 dB (-16 dB*)
Mute, -31 to 0 dB (-16 dB*)
Mute, -31 to 0 dB (-16 dB*)
Mute, -31 to 0 dB (-16 dB*)
Mute, -31 to 0 dB (-16 dB*)
Mute, -31 to 0 dB (-16 dB*)
Mute, -31 to 0 dB (-16 dB*)
en | 92
Description
The level of the treble
output.
Description
The signal that is available
on the headphones socket
of the network controller
and its volume level.
If headphones are not
connected, the signal is
available on the
loudspeaker.