Dcn-Fcs Channel Selector; Introduction; Controls, Connectors And Indicators - Bosch DCN Next Generation Installation & User's Instructions

DCN Next Generation | Installation and User Instructions | Flush-mounted Devices
27 DCN-FCS Channel
Selector
Caution
Before you touch the channel selector, take
measures to prevent electro-static discharges.
27. 1

Introduction

With the DCN-FCS Channel Selector, delegates and
chairmen can select a channel to listen to.
27.2 Controls, connectors and
indicators
27.2.1 Front view
The front of the channel selector (refer to figure 27.1)
contains:
1 Headphones socket - Connects headphones to
the channel selector (refer to section 27.5.2).
2 Volume buttons - Control the volume level of the
selected channel.
3 Display - Shows the number of the selected
channel.
4 Channel buttons - Select the channel.
5 External headphones (plug) - Connects an
external headphones socket to the channel selector
(refer to section 27.5.2).
1 2
figure 27. 1 : Front view
Bosch Security Systems | 2007-02 | 9922 141 70525
5
3 4
27.2.2 Top
The top of the channel selector (refer to figure 27.2)
contains:
6 DCN cable - Connects the channel selector to the
DCN (refer to section 27.5.1).
7 DCN socket - Makes a loop-through in the DCN
with the channel selector (refer to section 27.5.1).
8 Level reduction plug - Reduces the level of the
signal on the headphones when the microphone of a
connected device is enabled (refer to section 27.7).
7
figure 27.2: Top view
en | 187
6
X14
8