1MRS755001
4.6.
Figure 4.6-1 Defining initial transition for a sequence
4.7.
COM600 series 5.1
Sequence Control Configuration Manual
Adding an initial sequence transition
To add a new transition object:
1. Right-click the added POU object in the Devices view and add a new Transition
object by selecting Add Object > Transition.
2. Name the new transition object as Initial_Transition and set Structured Text (ST)
as the implementation language from the drop-down menu.
3. Select the added Initial_Transition object from the Devices view. In the corresponding
program editor, add the sequence Initial_Transition definition, see Figure 4.6-1.
Adding a new action object
To add a new action object:
1. Right-click the added POU object in the Devices view and add a new action by
selecting Add Object > Action.
2. Name the new transition object as Step1_Action and set Structured Text (ST) as
the implementation language from the drop-down menu.
3. Select the added Step1_Action object from the Devices view. In the corresponding
program editor, add the sequence Step1_Action object definition, see Figure 4.7-1.
adding_initial_transition.png
27