Network Operation With The Service Desktop - Siemens SINUMERIK 810D Commissioning Manual

Installing software and network operation

3.3 Network operation with the Service desktop

4 Change Gateway
If "Get IP Addresses" is set to "manually", the gateway is entered here. The gateway is
entered as an IP address.
---------------------------------------------------------------------------------------------------------------
Old Gateway: ...
New Gateway: <IP address>
---------------------------------------------------------------------------------------------------------------
5 Domain Name Server
If "Get IP Addresses" is set to "automatically" via DHCP, the IP address of the Domain Name
Server (DNS) is entered here. DHCP normally has a suitable Domain Name Server. If the
DNS has access to the correct computer/IP address assignment, nothing has to be entered
here.
6 Change DNS Extension
The extension of the Domain Name Server is entered here, e.g. SIEMENS.COM
Exiting the menu
When you exit the menu, you are prompted to confirm whether you want to save the network
connection parameter settings.
3.3 Network operation with the Service desktop
3.3
Overview
The Service desktop also functions as a service mode that can use the Windows
functionality to commission the controller. It also functions as a platform for network
operation (e.g., for installing HMI system software), for setting the runtime environment for
the HMI system software or for measures relating to the system, such as authorizing
SIMATIC STEP 7, checking the hard disk, checking the version, etc.
Configuring network operation
The PCU has one network port as standard:
1. Connect the Ethernet cable for TCP/IP communication.
2. You can adjust the settings by selecting Start → Settings → Network Connections → Local
3. If it is not already the case, the PCU computer name now has to be made unique in the
3-18
The default setting is DHCP. (Both the TCP/IP and NETBEUI protocols are preinstalled.)
Area Connection → Properties.
network: Select Start → Settings → Control Panel → System, Computer Name tab,
"Change" command button to enter the desired name.
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
PCU Basesoftware (IM6)