System Settings - Siemens SINUMERIK 810D Commissioning Manual

Notice
All of the applications must be exclusively installed on USER (F:); even if these applications
have a different drive set as the default drive in their installation path.
The names EMERGENCY, TMP, SYSTEM, USER must not be changed; otherwise the
"ServiceCenter" (see Section 4) will no longer function.
1.1.2

System settings

PCU default setting
A PCU 50 V2 has one integrated Ethernet interface. This is preset as a default DHCP client
for the address reference from a company network. A second additional Ethernet card must
be installed with an Ethernet interface to connect this PCU to an NCU or a TCU.
Note
If no fixed Internet address is set for the Ethernet "on-board" and no DHCP server is
available on the network, a so-called APIPA address is assigned under Windows XP. Boot
manager is extended by at least one minute (this is system-related and not an error on the
part of the HMI Manager).
The software package "PCU Basesoftware Thin Client" must be installed on the PCU if the
PCU 50 V2 is to be operated in a SINIUMERIK solution line network. When installing the
'PCU Basesoftware Thin Client' on the PCU 50 V2, the Ethernet interface on the additionally
installed Ethernet card must be set according to application.
References: Commissioning Manual Thin Client Configuration
Name of the PCU
Upon delivery of the system, a unique computer name is generated which can be read out
under: "Start" → "Settings" → "Control Panel" → "System", "Computer Name" tab.
Configuration of the operating system
For safety reasons, Windows XP has been preset as follows:
● The Autorun function is deactivated.
● Automatic Windows Update is deactivated.
● Monitoring and alerts for antivirus software and automatic update are deactivated.
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
Commissioning a system
1.1 Delivery condition of the system
1-3