Download  Print this page

Settings For Network Drives - Siemens SINUMERIK 810D Commissioning Manual

Hide thumbs

Advertisement

Installing software and network operation

3.2 Settings for network drives

3.2
Settings for network drives
3.2
Overview
Some of the Service menu functions below use network drives as a source or target when
installing software or backing up or restoring systems.
Settings for network operation
When necessary, the "Manage Network Drives" menu is provided in certain places on the
operating menu so that the required settings can be made.
You can then choose from the following network management functions:
---------------------------------------------------------------------------------------------------------------
1 Connect to Network Drives
2 Show connected Network Drives
3 Disconnect from all Network Drives
4 Change Network Settings
9 Back to previous menu
---------------------------------------------------------------------------------------------------------------
The following submenus are available for the individual menu items:
1 Connect to Network Drives
1. Enter the password permitting the operator to retrieve data (e.g., software) from or write
3-12
Note
Several installation directories can be set to enable an operator setup to be executed
automatically. Installation directories are the "Install" subdirectories, which are listed in
the SetupDirs section of the E:\Windows\System32\HMIServe.ini parameters file. The key
names contained within a section of the E:\Windows\System32\HMIServe.ini parameters
file must be unique.
The "D:\Install" installation directory is the default setting.
data (e.g., PCU images) to the shared directory using the networked PG/PC.
PG/PC with Windows XP:
Password of a local operator on the PG/PC
---------------------------------------------------------------------------------------------------------------
Type your passwd:
---------------------------------------------------------------------------------------------------------------
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
PCU Basesoftware (IM6)

Advertisement

This manual also for:

Sinumerik 840diSinumerik 840d

Comments to this Manuals

Symbols: 0
Latest comments: