Pcu With Sitop Ups Module - Siemens SINUMERIK 810D Commissioning Manual

= 1:
= 2:
= 3:
● Outputting information to the screen
= 0:
= 1:
2.4

PCU with SITOP UPS module

2.4
application
If the supply voltage to the PCU 50/70 dips, the SITOP UPS modules below could maintain
operation for a limited period if a backup battery is being used, allowing the PCU to be
properly shut down before the battery is exhausted:
Designation
6A module
15A module
6A module
15A module
Note
The UPS modules with USB interfaces can only be used on a PCU 50 with Windows XP
PCU Basesoftware.
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
InfoLevel (DWORD)
Mandatory information is output (default setting)
Mandatory and supplementary information is output
Mandatory, supplementary and trace information is output
(InfoLevel <= 0 is treated as InfoLevel == 1;
InfoLevel <= 3 is treated as InfoLevel == 3)
Whether the information is also to be displayed on the screen (as well as being output to
the log file) is set via registry value 'HKLM\SOFTWARE\Siemens\SINUMERIK\Basic
software\<version>\HMI Manager\ShowInfo':
ShowInfo (DWORD)
Displays the mandatory information,
no display of the supplemental and trace information
Mandatory, supplementary and trace information is displayed (default)
Interface
USB
USB
Serial
Serial
Configuring the system
2.4 PCU with SITOP UPS module
Order number
6EP1931-2DC41
6EP1931-2EC41
6EP1931-2DC31
6EP1931-2EC31
2-17