Siemens SINUMERIK 810D Commissioning Manual page 26

Configuring the system
2.1 Service menu functions (DOS function)
Main menu Function
4
[5]
9
5 REBOOT: Restart of the system
9 Return to Main Menu: Back to main menu
2 SINUMERIK Tools and Options: Load additional tools and enable options.
1 Activate STEP7 for PCU
9 Return to Main Menu: Back to main menu
3 DOS Shell: Call the DOS command interpreter, drive C:\ is displayed, type "EXIT" to leave the DOS shell.
4 Start Windows: The Windows functions can be used here.
1 Standard Windows (without starting SINUMERIK HMI)
4 Original SINUMERIK HMI Environment, started on next ramp-up
5 Current SINUMERIK HMI Environment, started on next ramp-up
9 Return to Main Menu: Back to main menu
5 SINUMERIK System Check:Test the file system for consistency, restore consistency with SCANDISK if
necessary.
7 Backup/Restore:
1 Hard disk Backup/Restore with GHOST
1
2
3
2-2
Change Install Directory
Install from (network drive), if set up
Back to previous menu
Configure GHOST Parameters: Set parameters (interface, path, network connection) for Norton
Ghost
1 Set Connection Mode PARALLEL (LPT:)
2 Set Connection Mode LOCAL/NETWORK
3 Change Backup Image File Name
4 Change Restore Image File Name
5 Change Machine Name (for Windows and DOS net)
1 Input Machine Name MANUALLY
2 Generate Machine Name RANDOMLY
9 Back to previous Menu
6 Manage Network Drives
7 Change Split Mode
1 NO Splitting
2 Splitting
9 Back to previous Menu
Harddisk Backup: Backing up the hard disk
Harddisk Restore: Restore the data backup of the hard disk
1 Windows XP
1 Standard Partitioning (default)
2 User-defined Partitioning
3 Image-defined Partitioning
2 Windows NT/Windows 2000 (submenu same as for Windows XP)
3 Windows 95 (submenu same as for Windows XP)
4 WfW3.11 (submenu same as for Windows XP)
5 DOS (spare part) (submenu same as for Windows XP)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
PCU Basesoftware (IM6)