Siemens SINUMERIK 810D Commissioning Manual page 61

2. Enter the letter of the PCU drive from which the connection must be accessed (e.g., "G").
3. Enter the computer name of the PG/PC and the name of the directory (share name) that
2 Show connected Network Drives
The current status of the connected drives is displayed:
---------------------------------------------------------------------------------------------------------------
Status: OK
Local Name: G:
Remote Name: \\r3344\HMINEW
Status: OK
Local Name: H:
Remote Name: \\r3344\HMI_P1
Press any key to continue ...
---------------------------------------------------------------------------------------------------------------
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
---------------------------------------------------------------------------------------------------------------
Letter for Network Drive:
---------------------------------------------------------------------------------------------------------------
you wish to access. A screenform opens containing data for the PG/PC connection:
---------------------------------------------------------------------------------------------------------------
Directory to be mounted (e.g., \\r3344\HMINEW):
---------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------
Machine Name: PCU_1_Name
User Name: auduser
Transport Protocol: NETBEUI
Logon to domain: No
Connect Network Drive (last): G: (\\r3344\HMINEW)
PLEASE SELECT
1 Connect to Network Drive
2 Show connected Network Drives
3 Disconnect from all Network Drives
4 Change Network Settings
9 Back to previous Menu
Your choice [1, 2, 3, 4, 9]:?
---------------------------------------------------------------------------------------------------------------
Installing software and network operation
3.2 Settings for network drives
3-13