Parameterizing The Service Menu (Dos) - Siemens SINUMERIK 810D Commissioning Manual

Main menu Function
4
9
4 Partitions Backup/Restore with Ghost: Back up partition contents of C:, E:, F: to D: or copy from D: back to
C:, E:, F:.
1
2
3
4
8
9
9 Return to Main Menu: Back to main menu
8 Start PC Link: Install software from a CD-ROM (Interlink/Interserve)
9 Reboot: System restart
2.1.1

Parameterizing the service menu (DOS)

Parameterizing the service menu
The points available in the Service menu can be parameterized as follows:
[a]
[b]
[c]
File "envparam.bat" must be created in directory C:\Tools, and filled with the commands
below for parameterization purposes:
Entry no.
1
2
4
6
String entries:
9
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
9 Back to previous Menu
Switch to other version of GHOST
Back to previous Menu: Return to previous menu
Configure GHOST Parameters
1 Change Maximum Backup Images
2 Define Emergency Backup Image
9 Back to previous Menu
Partitions Backup, Mode LOCAL
Partitions Restore, Mode LOCAL
Partition E (Windows) Restore, Mode LOCAL
Delete Image
Back to previous Menu
provide/suppress
observe special product designation (in place of SINUMERIK)
change text
DOS command
[a] set _INSTALL
[a] set _TOOLS
[a] set _SERVICE
[a] set _REBOOT
[a] set _HMI
[c] set _ENDTXT
[b] set _PRODUCTLINE
2.1 Service menu functions (DOS function)
Text/function, if =TRUE
1 Install/Update SINUMERIK
System
2 SINUMERIK Tools and Options
4 Start Windows (Service Mode)
6 Reboot System (Warmboot)
Display submenu with HMI functions Not displayed
=String
=String
Configuring the system
Text/function, if Preassign
= FALSE ment
Not displayed TRUE
Not displayed TRUE
Not displayed TRUE
Not displayed FALSE
TRUE
Restart (warm boot)
SINUMERIK
2-3