Siemens SINUMERIK 810D Commissioning Manual page 43

General settings
The following settings must be made in the SITOP monitor configuration dialogue box:
● Parameterization of the interface: For module with USB port
● Parameterization of the change action:
Figure 2-1
Parameterization of the SITOP monitor
Enter the path of the program that ensures that HMI Advanced and the PCU shut down
properly in the event of a power failure into the parameter area of the buffer.
E:\SITOP\Shutdown.bat
Figure 2-2
Alternatively, the following setting can be used: E:\Windows\system32\hmiexit.exe
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
The monitoring window display must be deselected, as this function can lead to sporadic
faults on the HMI operator interface.
Configuration of the SITOP monitor: General settings
Configuration of the SITOP monitor: Buffering settings
Configuring the system
2.4 PCU with SITOP UPS module
2-19