Boot Up Of The Pcu: Hmi Program Already Installed - Siemens SINUMERIK 810D Commissioning Manual

Explanations:
● If installation programs (such as HMI Advanced) are present in directory D:\Install, you
● In the service intro dialog, you can choose between "service" or "shutdown".
● Selecting "service" opens the service logon dialog.
1.3.2

Boot up of the PCU: HMI program already installed

Requirement
An HMI program (e.g. HMI Advanced) is already installed.
Ramp-up phase
Figure 1-7
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
will be prompted during the first boot up as to whether the installation procedure should
be started. After installation is completed, you need to restart the system.
The installation can also be skipped and carried out later.
Note
During the initial boot up of the PCU 50.3, the user can only log on as 'auduser'.
PCU bootup diagram (HMI program installed)
Commissioning a system
1.3 Boot up behavior of the PCU
1-13