Download  Print this page

Deleting The Backup Image - Siemens SINUMERIK 810D Commissioning Manual

Hide thumbs



Deleting the backup image

Operator action
While the PCU is ramping up (after switching the controller off and then on again)
1. Select the "Service menu" [hidden menu entry] in the Boot Manager.
2. Press key <7>: Backup/Restore
3. Enter one of the passwords for authorization levels 0 - 2.
Your Choice [1, 4, 5, 9]?
4. Press key <4>.
Your Choice [1, 2, 3, 4, 5, 8, 9]?
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
The main menu is displayed:
The system prompts you to enter a password:
The following menu is displayed:
1 Harddisk Backup/Restore with GHOST
4 Partitions Backup/Restore with GHOST
5 ADDM Backup/Restore
9 Back to Main Menu
The following menu is displayed:
1 Configure GHOST Parameters
2 Partitions Backup, Mode LOCAL
3 Partitions Restore, Mode LOCAL
4 Partition E (only Windows) Restore, Mode
8 Delete Image
9 Back to previous Menu
Backing up and Restoring Data
4.2 Backing up and restoring PCU partitions locally


This manual also for:

Sinumerik 840diSinumerik 840d

Comments to this Manuals

Symbols: 0
Latest comments: