Checking The Hard Disk - Siemens SINUMERIK 810D Commissioning Manual

2.1.6

Checking the hard disk

Purpose
All partitions (C:, D:, E:, F:) on the hard disk are checked.
Procedure
While the PCU is ramping up (after switching the controller off and then on again)
1. Select the Service menu [hidden menu entry] in the Boot Manager
2. Press key <5>: SINUMERIK System Check
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
The main menu is displayed.
Result:
The system will then restart automatically: The function is executed during the ensuing
start-up of Windows before the HMI system software is started.
Note
The hard disk can also be checked on the Service desktop by starting the function
"Check SINUMERIK System".
Configuring the system
2.1 Service menu functions (DOS function)
2-9