Siemens SINUMERIK 810D Commissioning Manual page 77

"Optional" start
The following steps are only applicable if you wish to change the default settings.
Here you can set the interface type, the network connection, the backup image path, and the
backup image split mode.
1. Set parameters for the Norton Ghost program:
Your Choice [1, 2, 3, 4, 5, 6, 7, 9]?
Notice
For the network connection described here the interface type must always be set to
LOCAL/NETWORK.
1. Change interface:
2. Establish/change network connection:
3. Setting the restore image:
4. Return to the previous menu:
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
Press key <1>: Configure GHOST Parameters
The following menu is displayed:
PLEASE SELECT:
1 Set Connection Mode PARALLEL (LPT:)
2 Set Connection Mode LOCAL/NETWORK
3 Change Backup Image Filename
4 Change Restore Image Filename
5 Change Machine Name (for Windows and DOS
net)
6 Manage Network Drives
7 Change Split Mode
9 Back to previous Menu
Press key <2>: Set Connection Mode LOCAL/NETWORK and confirm.
Press key <6>: Manage Network Drives
Press key <4>: Change Restore Image Filename
Enter the complete path for the restore file HMI.gho on the PG/PC, e.g.
C:\SINUBACK\PCU\HMI.gho
Press key <9>: Back to previous Menu
Prompt: Save GHOST parameters? Answer Yes.
4.1 Backing up/restoring data with an Ethernet connection
Backing up and Restoring Data
4-7