Siemens SINUMERIK 810D Commissioning Manual page 13

Note
If you press the "Reboot" button, the system immediately reboots (without prior prompting).
Use "Exit" to end the ServiceCenter Users.
Service dialogs during boot up
The following dialogs are shown during boot up:
● The Service Intro Dialog is shown, if no HMI program is installed or the start of the HMI
Figure 1-3
● If a service user wants to log in, the Service Logon Dialog is displayed:
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
program is deactivated.
Service Intro Dialog
– After pressing key <3> during boot up.
– After pressing the "Service" button in the service intro dialog.
Commissioning a system
1.2 User administration
1-9