Siemens SINUMERIK 810D Commissioning Manual page 63

Your choice [1, 2, 3, 4, 9]?
HINT: This change is temporary for the DOS net only!
On the next Windows start, this Machine Name is reset to the
Windows Machine Name. If you want to set the Machine Name
permanently,
please use "Change Machine Name (for Windows and DOS net)"
in the upper menu hierarchy!
OLD Machine Name: ...
NEW Machine Name: ...
---------------------------------------------------------------------------------------------------------------
Note
If no new name is entered, the old name is retained.
2 Change User name
---------------------------------------------------------------------------------------------------------------
OLD User Name: ...
NEW User Name: ...
---------------------------------------------------------------------------------------------------------------
Note
If no new name is entered, the old name is retained.
3 Toggle Protocol (NETBEUI or TCP/IP)
Each time you press <3> you toggle from the current protocol to the other one. The current
protocol setting is displayed in the header for the connection.
Note
If a connection has already been established with NETBEUI, you must restart the system to
toggle to TCP/IP. If a connection has not yet been established, you can toggle to the other
protocol immediately.
If a connection has already been established with TCP/IP, you must restart the system to
toggle to NETBEUI.
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
Installing software and network operation
3.2 Settings for network drives
3-15