Connecting A Module With A Connection Module - Siemens SIMATIC S7-1500/ET 200MP Equipment Manual

Wiring

3.3 Connecting a module with a connection module

3.3 Connecting a module with a connection module
Component for connecting
To connect sensors, you need 2 connection modules per module. The connection modules
are connected to the module with pre-assembled connecting cables.
You can find additional information on the components of the SIMATIC TOP connect system
cabling, e.g. for connecting connection modules, in the equipment manual SIMATIC TOP
connect for S7-1500 and ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/95924607).
Note
Common supply
If you use the listed SIMATIC TOP connect connection modules, then all 32 channels of a
connection module have a common supply. This means that 2 groups of 16 channels each
are supplied by common potential.
You can find the required components in the tables below.
Table 3- 3 SIMATIC TOP connect connection module
Components Typ
e
Connection TP1 1-wire connection, without LED
modules for
digital inputs
TP3 3-wire connection, without LED
14
Description
(sinking input)
1-wire connection, with LED (sink-
ing input)
1-wire connection, with LED
(sourcing input)
(sinking input)
3-wire connection, with LED (sink-
ing input)
Connection tech- Article number
nology
- Screw terminals 6ES7924-2AA20-0AA0
6ES7924-2AA20-0AC0
- Push-in system
- Screw terminals 6ES7924-2AA20-0BA0
- Push-in system 6ES7924-2AA20-0BC0
- Screw terminals 6ES7924-2AK20-0BA0
- Push-in system
6ES7924-2AK20-0BC0
- Screw terminals 6ES7924-2CA20-0AA0
- Push-in system 6ES7924-2CA20-0AC0
- Screw terminals 6ES7924-2CA20-0BA0
- Push-in system 6ES7924-2CA20-0BC0
Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)
Equipment Manual, 07/2020, A5E48025116-AA
Delivery
quantity
Pack of 1
Pack of 1
Pack of 1
Pack of 1
Pack of 1
Pack of 1
Pack of 1
Pack of 1
Pack of 1
Pack of 1