Log In With The Connectivity Module - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Commissioning
6.2 Commissioning with Android
6.2.3

Log in with the connectivity module

After a connection has been established from the "SIDRIVE IQ Config" application to the
connectivity module, a window is displayed where you can enter the login data for the
connectivity module.
Factory settings for logging in
The factory settings for logging in are as follows:
• User name: "admin"
• Password: Comprising the last 6 digits of the serial number on the rating plate of the
connectivity module.
Caution: Not the serial number of the motor!
Note
Change the user name and password after logging on for the first time for protection against
unauthorized access to the connectivity module. In the "Device Credentials" step of the
commissioning wizard, you are requested to change the login data.
40
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL