Table 81: Event List Settings; Figure 147: Create New Event List - Grandstream Networks UCM6510 User Manual

URI
Local Extensions
Remote Extensions
Special Extensions
Remote extension monitoring works on the UCM6510 via event list BLF, among Peer SIP trunks or
Register SIP trunks (register to each other). Therefore, please properly configure SIP trunks on the
Firmware Version 1.0.10.39

Figure 147: Create New Event List

Table 81: Event List Settings

Configure the name of this event list (for example, office_event_list).
Please note the URI name cannot be the same as the extension name on
the UCM6510. The valid characters are letters, digits, _ and -.
Select the available extensions listed on the local UCM6510 to be
monitored in the event list.
If LDAP sync is enabled between the UCM6510 and the peer UCM6510,
the remote extensions will be listed under "Available Extensions". If not,
manually enter the remote extensions under "Special Extensions" field.
Manually enter the remote extensions in the peer/register trunk to be
monitored in the event list.
Valid format: 5000,5001,9000
UCM6510 IP PBX User Manual Page 260 of 339