Figure 123: Ring Group Configuration - Grandstream Networks UCM6510 User Manual

Ring Timeout on Each Member
Auto Record
Enable Destination
Secret
Email Address
Firmware Version 1.0.10.39
to caller. The file
Options->Custom Prompt, or click the 'Prompt' to add additional record.
Configure the number of seconds to ring each member. If set to 0, it will
keep ringing. The default setting is 30 seconds.
Note:
The actual ring timeout might be overridden by users if the phone has ring
timeout settings as well.
Once this option is enabled, the calls using this extension or trunk will be
automatically recorded.
If enabled, users could select extension, voicemail, ring group, IVR, call
queue, voicemail group as the destination if the call to the ring group has
no answer. Secret and Email address are required if voicemail is selected
as the destination.
Configure the password to access the ring group extension's voicemail.
Note:
The password has to be at least 4 characters.
Configure the Email address of the ring group extension's voicemail. If
"Attach Recordings
GUI->PBX->Voicemail->Voicemail Email Settings, the voicemail can be
sent to the ring group's Email address as attachment.

Figure 123: Ring Group Configuration

UCM6510 IP PBX User Manual
can be uploaded from
to E-mail" is
web GUI->Internal
enabled from web
Page 226 of 339