Event Notification - Grandstream Networks WP820 Administration Manual

Generation
Core Dump
Selects the existing core dump file in the drop-down box. Users could delete the file by pressing on "Delete" button.
List
View Core Press "List" button to view all existing core dump files. The files are listed in chronological order, users could click the
Dump file name to download the file to the local computer.
Record
Click to start capturing audio data, click the "Stop" button to end. To capture the audio data of the device can help to
Record
locate audio issues. The default is not enabled. You can record up to 1-minute audio data.
Recording
Choose the existing audio file and click the "Delete" button on the right to delete it.
List
View Click on the "List" button to view. The captured audio data will be sorted by time. Click to download the data to the
Recording computer for analysis. Users can also delete files under this folder.
Screenshot
Screenshot Click the screenshot to capture and save the current phone screen image.
Screenshot
Selects the existing screenshot file and click the "Delete" button on the right to delete the file.
List
View Click the "List" button to view the existing screenshot file. Click the file name to open or save the screenshot to the
Screenshot computer.
Traceroute
Configures the IP address or URL for the Target Host of the Traceroute.
Target Host Press Start to send traceroute request to configured target host.
Press Stop to end traceroute running process.
Ping
Configures the IP address or URL for the Target Host in order to ping it.
Target Host Press Start to start pinging the configured target host.
Press Stop to pinging the configured host.
NSLookup
Enter a host name and find out the corresponding IP address. It will also do reverse name lookup and find the host name
Host Name
for an IP address you specify.

Event Notification

Set the URL for events on the phone web GUI, and when the corresponding event occurs on the phone, the phone will send
the configured URL (including variables) to the destination. The dynamic variables in the URL will be replaced by the actual
values of the phone before sending to the destination, in order to achieve the purpose of events notification. Here are the
standards:
1. The IP address of the destination server needs to be added at the beginning. The server address and dynamic variables
need to be separated with a "/".
Table 32 : System Diagnosis