Statistics; Table 107: Cdr Statistics Filter Criteria; Figure 187: Downloaded Cdr File Sample - Source Channel And Dest Channel 3; Figure 188: Cdr Statistics - Grandstream Networks UCM6510 User Manual

Sample 3:

Figure 187: Downloaded CDR File Sample - Source Channel and Dest Channel 3

This is a very special channel name. If it shows up, most likely it means a conference call.
There are some other possible values, but these values are almost the application name which are used
by the dialplan.
IAX2/NUM-XXXXXXX: it means this is an IAX call.
Local/@from-internal-XXXXX: it is used internally to do some special feature procedure. We can simply
ignore it.
Hangup: the call is hung up from the dialplan. This indicates there are some errors or it has run into
abnormal cases.
Playback: play some prompts to you, such as 183 response or run into an IVR.
ReadExten: collect numbers from user. It may occur when you input PIN codes or run into DISA

STATISTICS

CDR Statistics is an additional feature on the UCM6510 which provides users a visual overview of the call
report across the time frame. Users can filter with different criteria to generate the statistics chart.
Trunk Type Select one of the following trunk type.



Call Type Select one or more in the following checkboxes.

Firmware Version 1.0.10.39

Figure 188: CDR Statistics

Table 107: CDR Statistics Filter Criteria

All
SIP Calls
PSTN Calls
Inbound calls
UCM6510 IP PBX User Manual Page 315 of 339