Grandstream Networks UCM6510 User Manual page 288

TLS Enable
TLS Bind Address
TLS Client Protocol
TLS Do Not Verify
TLS Self-Signed CA
TLS Cert
TLS CA Cert
TLS CA List
Firmware Version 1.0.10.39
to all interfaces. The port number is optional. If not specified, 5060 will be
used.
Configure to allow incoming TLS connections with the UCM6510. The
default setting is "No".
Configure the IP address for TLS server to bind to. 0.0.0.0 means binding
to all interfaces. The port number is optional. If not specified, 5061 will be
used.
Note:
The IP address must match the common name (hostname) in the
certificate. Please do not bind a TLS socket to multiple IP addresses. For
details on how to construct a certificate for SIP, please refer to the following
document:
http://tools.ietf.org/html/draft-ietf-sip-domain-certs
Select the TLS protocol for outbound client connections. The default
setting is TLSv1.
If enabled, the TLS server's certificate won't be verified when acting as a
client. The default setting is "Yes".
This is the CA certificate if the TLS server being connected to requires
self-signed certificate, including server's public key. This file will be
renames as "TLS.ca" automatically.
Note:
The size of the uploaded ca file must be under 2MB.
This is the Certificate file (*.pem format only) used for TLS connections. It
contains private key for client and signed certificate for the server. This file
will be renamed as "TLS.pem" automatically.
Note:
The size of the uploaded certificate file must be under 2MB.
This file must be named with the CA subject name hash value. It contains
CA's (Certificate Authority) public key, which is used to verify the accessed
servers.
Note:
The size of the uploaded CA certificate file must be under 2MB.
Display a list of files under the CA Cert directory.
UCM6510 IP PBX User Manual Page 287 of 339