Figure 177: System Events->Alert Log; Figure 178: Filter For Alert Log - Grandstream Networks UCM6510 User Manual

User could also filter alert logs by selecting a certain event category, type of alert log, and/or specifying a
certain time period. The matching results will be displayed after clicking on
classified into two types by the system:
1. Generate Alert: Generated when alert events happen, for example, alert logs for disk usage
exceeding the alert threshold.
2. Restore to Normal: Generated when alert events being cleared, for example, logs for disk usage
dropping back below the alert threshold.
User could filter out alert logs of "Generate Alert" or "Restore to Normal" by specifying the type according
to need. The following figure shows an example of filtering out alert logs of type of "Restore to Normal".
Firmware Version 1.0.10.39
Figure 177: System Events->Alert Log

Figure 178: Filter for Alert Log

UCM6510 IP PBX User Manual
. Alert logs are
Page 309 of 339