One-Key Dial; Figure 144: Configure One-Key Dial - Grandstream Networks UCM6510 User Manual
Ip pbx
Hide thumbs
Also See for UCM6510:
- User manual (483 pages) ,
- Basic configuration manual (30 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
ONE-KEY DIAL
The UCM6510 supports One-Key Dial that allows users to call a certain destination by pressing one digit 0
to 9 on the keypad. This creates a system-wide speed dial access for all the extensions on the UCM6510.
To enable One-Key Dial, on the UCM6510 web GUI, go to page PBX->Call Features->One-Key Dial.
Figure 144: Configure One-Key Dial
User should first decide a digit used for One-Key Dial and check the option "Enable Destination" for the
digit.
Then select a dial destination from "Default Destination". The supported destinations include
extension, voicemail, conference room, voicemail group, IVR, ring group, call queue, page group, fax,
DISA, Dial by Name and external number.
Firmware Version 1.0.10.39
UCM6510 IP PBX User Manual
Page 253 of 339
Advertisement
Table of Contents
Troubleshooting
