Firmware Version 1.0.1.12 - Grandstream Networks UCM6510 User Manual

Ip pbx
Hide thumbs Also See for UCM6510:
Table of Contents

Advertisement

Added support to send UNREGISTER when VoIP trunk is disabled [Table 57: SIP Register Trunk
Configuration Parameters]
Added LDAP client support [LDAP CLIENT CONFIGURATIONS]
Added option to specify the chronological order to voice mails [Table 69: Voicemail Settings]
Added option to configure whether to skip pressing ½ to accept or reject calls from Follow Me [Table
77: Follow Me Settings]
Added option to specify port range in Port Forwarding configuration [Table 11: UCM6510 Network
Settings->Port Forwarding]
Added ability to go back to IVR menu from Dial By Name by pressing the star key [DIAL BY NAME
CONFIGURATION]
Added support to upgrade SIP end device via SD card in Zero Config [Table 26: Global Policy
Parameters – Maintenance]
Added ability to filter alert logs [ALERT LOG]
Added ability to delete alert logs [ALERT LOG]
Added NAT option for peer trunk [Table 63: Outbound Route Configuration Parameters]
Improved Automatic Download CDR result format [CDR]
Fixed Digital Trunk SS7 signaling mode inbound / outbound call problem
Fixed Asterisk is crashed while using external MCB and CEI

FIRMWARE VERSION 1.0.1.12

Added Active Calls feature to monitor call status and barge in active calls [ACTIVE CALLS AND
MONITOR]
Added support to disable the trunk for VoIP trunk and analog trunk [Table 56: Create New SIP Trunk]
[Table 45: Analog Trunk Configuration Parameters]
Added RBS support on T1 [Error! Reference source not found.]
Added Frame Relay support on Data Trunk [DATA TRUNK]
Added 'Assign CIC to D-channel' option on SS7 settings page [Table 49: Digital Hardware
Configuration Parameters: E1 - SS7]
Added 'First CIC' option in SS7 configuration [Table 49: Digital Hardware Configuration Parameters:
E1 - SS7]
Added 'D-Chan' selection for PRI and SS7 in editing digital ports [Table 48: Digital Hardware
Configuration Parameters: E1 – PRI_NET/PRI_CPE] [Table 49: Digital Hardware Configuration
Parameters: E1 - SS7]
Added support for Ring simultaneously feature for extensions [Table 31: SIP Extension Configuration
Parameters]
Added support for Music On Hold selection per extension [Table 31: SIP Extension Configuration
Parameters]
Added support to disable this extension per extension [Table 31: SIP Extension Configuration
Parameters]
Firmware Version 1.0.10.39
UCM6510 IP PBX User Manual
Page 20 of 339

Advertisement

Table of Contents
loading

Table of Contents