Conference Bridge; Conference Bridge Configurations; Table 65: Conference Bridge Configuration Parameters - Grandstream Networks UCM6510 User Manual

The UCM6510 supports Conference Bridge allowing 64 participants with up to 8 bridges at the same time.
The conference bridge
Features->Conference. In this page, users could create, edit, view, invite, manage the participants and
delete conference bridges. The conference bridge status and conference call recordings (if recording is
enabled) will be displayed in this web page as well.

CONFERENCE BRIDGE CONFIGURATIONS


Click on "Create New Conference Room" to add a new conference bridge.

Click on to edit the conference bridge.

Click on to delete the conference bridge.
Extension
Password
Admin Password
Enable Caller Menu
Record Conference
Firmware Version 1.0.10.39

CONFERENCE BRIDGE

configurations can

Table 65: Conference Bridge Configuration Parameters

Configure the conference number for the users to dial into the conference.
When configured, the users who would like to join the conference call must
enter this password before accessing the conference bridge.
Note:

If "Public Mode" is enabled, the password is not required to join the
conference bridge thus this field is invalid.

The password has to be at least 4 characters.
Configure the password to join the conference bridge as administrator.
Conference administrator can manage the conference call via IVR (if
"Enable Caller Menu" is enabled) as well as invite other parties to join the
conference by dialing "0" (permission required from the invited party) or "1"
(permission not required from the invited party) during the conference call.
Note:

If "Public Mode" is enabled, the password is not required to join the
conference bridge thus this field is invalid.

The password has to be at least 4 characters.
If enabled, conference participant could press the * key to access the
conference bridge menu. The default setting is "No".
If enabled, the calls in this conference bridge will be recorded automatically
UCM6510 IP PBX User Manual
be accessed under web GUI->PBX->Call
Page 199 of 339