Voicemail; Configure Voicemail; Table 69: Voicemail Settings - Grandstream Networks UCM6510 User Manual

CONFIGURE VOICEMAIL

If the voicemail is enabled for UCM6510 extensions, the configurations of the voicemail can be globally set
up and managed under web GUI->PBX->Call Features->Voicemail.
Max Greeting
Dial '0' For Operator
Max Messages Per Folder
Max Message Time
Min Effective Message Time
Announce Message Caller-ID
Firmware Version 1.0.10.39

VOICEMAIL

Table 69: Voicemail Settings

Configure the maximum number of seconds for the voicemail greeting. The
default setting is 60 seconds.
If enabled, the caller can press 0 to exit the voicemail application and
connect to the configured operator's extension. The operator extension
can be configured under web GUI->PBX->Internal Options->General.
Configure the maximum number of messages per folder in users'
voicemail. The valid range 10 to 1000. The default setting is 50.
Select the maximum duration of the voicemail message. The message will
not be recorded if the duration exceeds the max message time. The default
setting is 15 minutes. The available options are:

1 minute

2 minutes

5 minutes

15 minutes

30 minutes

Unlimited
Configure the minimum effective duration (in seconds) of a voicemail
message. Messages will be automatically deleted if the duration is shorter
than the Min Effective Message Time. The default setting is 3 seconds.
The available options are:

No minimum

1 second

2 seconds

3 seconds

4 seconds

5 seconds
Note:
Silence and noise duration are not counted in message time.
If enabled, the caller ID of the user who has left the message will be
UCM6510 IP PBX User Manual Page 219 of 339