Maintenance/Event Notification - Grandstream Networks GHP6 Series Administration Manual

Enable Core
Configures whether to generate and save the core dump file when the program crashes.
Dump
The default setting is "No".
Generation
Core Dump Selects the existing core dump file in the drop-down box. Users could delete the file by pressing on "Delete"
List button.
View Core Press "List" button to view all existing core dump files. The files are listed in chronological order, users could
Dump click the file name to download the file to the local computer.
Record
Click to start capturing audio data, click the "Stop" button to end. To capture the audio data of the device
Record
can help to locate audio issues. The default is not enabled. You can record up to 1-minute audio data.
Recording
Choose the existing audio file. Click the "Delete" button on the right to delete this file.
List
Click on the "List" button to view. The captured audio data will be sorted by time. Click to download the
View
data to the computer for analysis. Note: The audio data file will be saved under FileManager �� Internal
Recording
Storage �� Recfiles folder. Users can also delete files under this folder.
Traceroute
The IP address or URL for the Target Host of the Traceroute.
Target Host Press Start to send traceroute request to configured target host.
Press Stop to end traceroute running process.
Ping
Target Host The IP address or URL for the Target Host of the Ping.
Ping
Enter a host name and find out the corresponding IP address. It will also do reverse name lookup and find
Host Name
the host name for an IP address you specify.

Maintenance/Event Notification

Set the URL for events on phone web GUI, and when the corresponding event occurs on the phone, the phone will send the
configured URL to SIP server. The dynamic variables in the URL will be replaced by the actual values of the phone before
sending to SIP server, in order to achieve the purpose of events notification. Here are the standards:
1. The IP address of the SIP server needs to be added at the beginning and separate the dynamic variables with a "/".
2. The dynamic variables need to have a "$" at the beginning. For example: local=$local
3. If users need to add multiple dynamic variables in the same event, users could use "&" to connect with different dynamic
variables. For example: 192.168.40.207/mac=$mac&local=$local
4. When the corresponding event occurs on the phone, the phone will send the MAC address and phone number to server
address 192.168.40.207.
Bootup Completed Configures the event URL when phone boots up.
Table 30: Maintenance/System Diagnosis