Figure 70: Edit Device - Grandstream Networks UCM6510 User Manual

A new dialog will be displayed for the users to configure "Basic" settings and "Advanced" settings.
"Basic" settings have the same configurations as displayed when manually creating a new device, i.e.,
account, line key and MPK settings; "Advanced" settings allow users to configure more details in a
five-level structure.
A preview of the "Advanced" settings is shown in the above figure. There are five levels configurations
as described in (1) (2) (3) (4) (5) below, with priority from the lowest to the highest. The configurations
in all levels will take effect for the device. If there are same options existing in different level
configurations with different value configured, the higher level configuration will override the lower level
configuration.
(1) Global Policy
This is the lowest level configuration. The global policy configured in web UI->PBX->Zero
Config->Global Policy will be applied here. Clicking on "Modify Global Policy" to redirect to page
PBX->Zero Config->Global Policy.
(2) Global Templates
Select a global template to be used for the device and click on
templates can be selected and users can arrange the priority by adjusting orders via
Firmware Version 1.0.10.39

Figure 70: Edit Device

UCM6510 IP PBX User Manual
to add. Multiple global
and .
Page 108 of 339