Figure 171: System Events->Alert Events Lists: Modify Admin Password; Figure 172: System Events->Alert Events Lists: Memory Usage; Figure 173: System Events->Alert Events Lists: System Reboot - Grandstream Networks UCM6510 User Manual

2. Modify Admin Password
Figure 171: System Events->Alert Events Lists: Modify Admin Password

Detect Cycle: The UCM6510 will initiate the admin password check based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
3. Memory Usage

Detect Cycle: The UCM6510 will perform the memory usage detection based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.

Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
system will send the alert.
4. System Reboot

Detect Cycle: The UCM6510 will check the system reboot based on this cycle. Users can enter
the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
5. System Update
Firmware Version 1.0.10.39
Figure 172: System Events->Alert Events Lists: Memory Usage
Figure 173: System Events->Alert Events Lists: System Reboot
UCM6510 IP PBX User Manual Page 307 of 339