Sample Configuration For Fax-To-Email; Figure 140: Create Fax Extension - Grandstream Networks UCM6510 User Manual

SAMPLE CONFIGURATION FOR FAX-TO-EMAIL

The following instructions describe a sample configuration on how to use Fax-to-Email feature on the
UCM6510.
1. Connect PSTN line to the UCM6510 FXO port.
2. Go to UCM6510 web GUI->Internal Options->Fax/T.38 page. Create a new Fax extension.
3. Go to UCM6510 web GUI->Basic/Call Routes->Analog Trunks page. Create a new analog trunk
with "FAX Detection" set to "No".
4. Go to UCM6510 web GUI->Basic/Call Routes->Inbound Routes page. Create a new inbound route
and set the default destination to the Fax extension.
Firmware Version 1.0.10.39

Figure 140: Create Fax Extension

UCM6510 IP PBX User Manual Page 245 of 339