Table 59: Create New Iax Trunk - Grandstream Networks UCM6510 User Manual

SRTP
Sync LDAP Enable
Sync LDAP Password
Sync LDAP Port
LDAP Outbound Rule
LDAP Dialed Prefix
CC Settings
Enable CC
CC Max Agents
CC Max Monitors
Type
Provider Name
Host Name
Firmware Version 1.0.10.39
configured for this extension. If no Email address can be found for the
user, the Fax will be sent to the default Email address configured in
Fax setting page under web UI->PBX->Internal Options->Fax/T.38.
Enable SRTP for the VoIP trunk. The default setting is "No".
If enabled, the local UCM6510 will automatically provide and update the
local LDAP contacts to the remote UCM6510 SIP peer trunk. In order to
ensure successful synchronization, the remote UCM6510 peer also
needs to enable this option on the SIP peer trunk. The default setting is
"No".
This is the password used for LDAP contact file encryption and decryption
during the LDAP sync process. The password must be the same on both
UCM6510 peers to ensure successful synchronization.
Configure the TCP port used LDAP sync feature between two peer
UCM6510.
Specify an outbound rule for LDAP sync feature. The UCM6510 will
automatically modify the remote contacts by adding prefix parsed from
this rule.
Specify the prefix for LDAP sync feature. The UCM6510 will automatically
modify the remote contacts by adding this prefix.
If enabled, the system will automatically alert the user when a called party
is available, given that a previous call to that party failed for some reason.
Configure the maximum number of CCSS agents which may be allocated
for this channel. In other words, this number serves as the maximum
number of CC requests this channel is allowed to make. The minimum
value is 1.
Configure the maximum number of monitor structures which may be
created for this device. In other words, this number tells how many callers
may request CC services for a specific device at one time. The minimum
value is 1.

Table 59: Create New IAX Trunk

Select the VoIP trunk type.

Peer IAX Trunk

Register IAX Trunk
Configure a unique label to identify this trunk when listed in outbound
rules, inbound rules and etc.
Configure the IP address or URL for the VoIP provider's server of the
UCM6510 IP PBX User Manual Page 180 of 339