Change Password; Figure 16: Operation Logs Filter - Grandstream Networks UCM6510 User Manual

The above figure shows an example that operations made by user "support" on device with IP
192.168.40.173 from 2014-11-01 00:00 to 2014-11-06 15:38 are filtered out and displayed.
To delete operation logs, users can perform filtering first and then click on
delete the filtered result of operation logs. Or users can click on
operation logs at once.

CHANGE PASSWORD

After logging in the web GUI for the first time, it is highly recommended for users to change the default
password "admin" to a more complicated password for security purpose. Follow the steps below to change
the web GUI access password.
1. Go to web GUI->Settings->User Management-> Change Password page.
2. Enter the old password first.
3. Enter the new password and retype the new password to confirm. The new password has to be at
least 4 characters. The maximum length of the password is 16 characters.
4. Configure the Email Address that is used when login credential is lost.
5. Click on "Save" and the user will be automatically logged out.
6. Once the web page comes back to the login page again, enter the username "admin" and the new
password to login.
Firmware Version 1.0.10.39

Figure 16: Operation Logs Filter

UCM6510 IP PBX User Manual
to
to delete all
Page 47 of 339