Changing Admin Level Password; Security Settings - Grandstream Networks WP820 User Manual

Note
DO NOT USE same password for both user and admin accounts.
The password is case sensitive with maximum length of 25 characters.

Changing Admin Level Password

1. Access the Web GUI of your WP820 using the admin's username and password. (Default username and password is:
admin/admin).
2. Press Login to access your settings.
3. Go to System Settings
4. In User Info Management, locate admin password section:
Type in the admin password in the Current Admin Password field
Type in your new user password in New Admin Password field.
Type in again same entered password in Confirm New Admin Password field.
5. Press Save and Apply buttons to save your new settings.
Note
DO NOT USE same password for both user and admin accounts.
The password is case sensitive with maximum length of 25 characters.
Changing HTTP / HTTPS Web Access Port
1. Access the Web GUI of your WP820 using the admin's username and password. (Default username and password are:
admin/admin).
2. Press Login to access your settings.
3. Go to System Settings
4. In Web/SSH Access page, select the access method depending on desired protocol (HTTP or HTTPS)
5. Locate HTTP / HTTPS Web Port field and change it to your desired/new HTTP / HTTPS port.
Note: By default, the HTTP port is 80 and HTTPS is 443.
6. Press Save and Apply buttons to save your new settings.
��

Security Settings.

Figure 9: Admin Level Password
�� Security Settings.