Figure 159: Announcements Center Code Configuration; Figure 160: Announcements Center Example - Grandstream Networks UCM6510 User Manual

4. Click
5. Give a name for the newly created Announcements Center, and the Code is used to specifiy the
message that will be sent to the group.
6. Select the message that will be used by the code from the Custom Prompt drop down menu. To
create a new Prompt, please click Prompt and follow the instruction.
Code and Group number are used together to direct specified message to the target group. All extensions
in the group will received the message. For example, in this example, we can send code 55 to group 666.
To use, we can simply pick up any extension registered at UCM6510, dial number 55666 which is the code
with the group number. Extension 1000, 1001 and 1002 will receive this voice message.
Firmware Version 1.0.10.39

Figure 159: Announcements Center Code Configuration

Figure 160: Announcements Center example

UCM6510 IP PBX User Manual
to create a new Announcement Center.
Page 294 of 339