Grandstream Networks UCM6510 User Manual page 319

caller=5300,5302-5304,_4@
-OR-
caller=5300&caller=5302-5304&
caller=_4@
(Matches extensions 5300, 5302,
5303, 5304, and any extension
containing 4 as the second
digit/character).
Date and/or time of day in any of
startTime
the following formats:
YYYY-MM-DDTHH:MM
YYYY-MM-DDTHH:MM:SS
YYYY-MM-DDTHH:MM:SS.SSS
(literal 'T' character separator in
above three formats)
endTime
HH:MM
HH:MM:SS
HH:MM:SS.SSS
now
DDDDDDDDDD
minDur
Number (duration in seconds)
maxDur
Example Queries:
The following illustrates the format of queries to accomplish certain requests. In most cases, multiple
Firmware Version 1.0.10.39
hyphen rather than a range signifier. The '@' wildcard
matches any number of characters (including zero), while
'_' matches any single character. Otherwise, patterns
containing a single hyphen will be matching a range of
numerical extensions, with non-numerical characters
ignored, while patterns containing multiple hyphens will
be ignored. (The pattern "0-0" will match all
non-numerical and empty strings).
Filters based on the start (call start time) value. Calls
which start within this period (inclusive of boundaries) will
match, regardless of the call answer or end time. An
empty value for either field will be interpreted as range
with no minimum or maximum respectively.
Strings without a date have a default value of
2000-01-01. Strings without a time of day have a default
value of of 00:00 UTC, while strings with a time of day
specified may also optionally specify a time zone offset -
replace '+' in time zone offset with '%2B' (see
http://www.w3.org/TR/NOTE-datetime).
Filters based on the billsec value, the duration between
call answer and call end.
UCM6510 IP PBX User Manual Page 318 of 339