Inbound Route: Multiple Mode; Figure 107: Inbound Route Feature: Prepend - Grandstream Networks UCM6510 User Manual
Ip pbx
Hide thumbs
Also See for UCM6510:
- User manual (483 pages) ,
- Basic configuration manual (30 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
Figure 107: Inbound Route feature: Prepend
The following example demonstrates the process,
1. If Trunk provides a DID pattern of 18005251163.
2. If Strip is set to 8, UCM6510 will strip the first 8 digits.
3. If Prepend is set to 2, UCM6510 will then prepend a 2 to the stripped number, now the number
become 2163.
4. UCM6510 will now forward the incoming call to extension 2163.
INBOUND ROUTE: MULTIPLE MODE
In UCM6510, user can configure inbound route to enable multiple mode to switch between different destinations.
The inbound multiple mode can be enabled under Inbound Route settings.
Firmware Version 1.0.10.39
UCM6510 IP PBX User Manual
Page 195 of 339
Advertisement
Table of Contents
Troubleshooting
