Value-Added Features; Fax Sending; Figure 156: Fax Sending In Web Ui - Grandstream Networks UCM6510 User Manual

VALUE-ADDED FEATURES

FAX SENDING

The UCM6510 supports sending Fax via web UI access. This feature can be found on web
UI->PBX->Value-added Features->Fax Sending page. In order to send fax, pre-setup for analog trunk
and outbound route is required.
After making sure analog trunk or VoIP Trunk is setup properly and UCM6510 can reach out to PSTN
numbers via the trunk, on Fax Sending page, enter the fax number and upload the file to be faxed. Then
click on "Send" to start. The progress of sending fax will be displayed in web UI. Users can also view the
sending history is in the same web page.

Figure 156: Fax Sending in Web UI

Firmware Version 1.0.10.39 UCM6510 IP PBX User Manual Page 291 of 339