Energy Saver Mode - Ricoh G035 Service Manual

2.12 ENERGY SAVER MODE

When the machine is not used, the energy saver feature reduces power
consumption by switching off fusing lamp.
Entering the Energy Saver Mode
Energy saver mode starts after the machine has been idle for a certain time. The
user specifies this time by user menu. The following choices are available.
• 0 minute: Off (energy saver mode never activates)
• 15 minutes
• 30 minutes (default)
• 1 hour
• 2 hours
• 3 hours
If the user selects "No" for Auto off mode (SP2-17), "0 minutes" does not appear
on the LCD in the user menu. (The user will not be able to select "Off" mode.)
NOTE: When the machine is in energy saver mode, the CPU turns off the fusing
lamp. Therefore, the time from the print start command to the start of
printing is longer than in normal standby mode.
Leaving Energy Saver Mode
The machine leaves energy saver mode when one of the following happens.
• The print command is received from a PC
• Any key on the operation panel is pressed
SM 2-63
ENERGY SAVER MODE
G035