Ricoh G035 Service Manual page 533

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – P7045
RICOH – AP4500
SAVIN – SLP45
SUBJECT: DEVELOPMENT SLEEVE ASSEMBLY
GENERAL:
The Doctor Blade Gap has been narrowed from 0.4±0.05 mm to 0.38±0.03 mm to ensure that toner does
not stick to the operator side of the Development Roller. The following part update is being issued for all
G035 Parts Catalogs. Please update your parts catalog with the following information.
OLD PART NO. NEW PART NO.
G0343100
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
   
Copyright 2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
G035 – 022
G0343101 Development Sleeve Assy
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
03/06/2003
REFERENCE
QTY INT PAGE ITEM
1 0 35 9