Drive Area; Registration Clutch And Transfer Belt Clutch - Ricoh G035 Service Manual

DRIVE AREA

6.10 DRIVE AREA

6.10.1 REGISTRATION CLUTCH AND TRANSFER BELT CLUTCH

[A]
[B]
G035R539.WMF
G035R906.WMF
1. Remove the connector cover [A] and rear cover [B] (4 screws).
2. If the optional LCT has been installed:
Remove the harness cover (1 screw) and disconnect the LCT interface
harnesses
3. Remove the right rear cover [C] (3 screws).
4. Remove the power pack bracket [D] (2 screws, 6 connectors).
5. Remove 2 flywheels [E] (3 screws).
6. Remove the registration clutch [F] (1 E-ring, 1 connector).
7. Remove the transfer belt clutch assembly [G] (2 screws, 2 connectors).
G035
[F]
[C]
[G]
6-44
[E]
[D]
G035R905.WMF
SM