Ricoh G035 Service Manual page 486

PCBS
6.12.3 PRINTER CONTROL BOARD AND NIB
⇒
A853I508.WMF
[C]
G035R013.WMF
1. Remove the printer controller cover. (See Covers.)
2. Remove the printer controller assembly [A] (2 screws).
3. Remove the optional hard disk unit [B] (4 screws, 1 connector) and DRAM
SIMMs that have been installed.
4. Remove the NIB [C] (4 screws, 1 connector).
5. Remove the NVRAM [D] from the old printer control board and install it on the
new printer control board.
G035
[A]
6-50
Rev. 03/2000
[B]
G035R014.WMF
G035R012.WMF
[D]
SM