Ricoh G035 Service Manual page 102

IMAGE TRANSFER AND PAPER SEPARATION
2. The transfer belt contact clutch turns on at a
certain time after the main motor starts. Then,
the transfer belt moves into contact with the
drum.
3. When the paper enters the gap between the
belt and the drum, the high voltage supply
board [A] applies a high positive current to
the belt to transfer the image to the paper.
I1 = It + I2
4. After receiving the image from the drum, the paper is fed by the belt.
5. The paper moves to the end of the transfer belt unit, where it separates from
the belt as the belt curves away. Then, the paper goes to the fusing unit.
G035 2-50
G035D523.WMF
[A]
G035D521.WMF
SM