Ricoh G035 Service Manual page 382

BRIDGE UNIT FOR MAILBOX (G912)
[A]
[F]
11. Pull up the tab [A] of the protective sheet.
NOTE: 1) Do not remove the protective sheet at this time.
2) Make sure that all mylars are held between the two folded halves of
the protective sheet.
12. Carefully turn over the bridge unit [B] and insert the protective sheet [C] into the
gap [D] between the paper guides. Next, insert the bridge unit onto the mailbox
[E].
NOTE: When holding the bridge unit, do not touch the timing belt. Otherwise
the timing belt may come off the gear.
13. Remove the tape [F] of the protective sheet.
14. Open the upper paper guide [G] then pull out the protective sheet [H].
NOTE: Check that all mylars are set into the gap between the paper guides.
G035
G912I501.WMF
[D]
[G]
G912I508.WMF
[H]
[E]
[H]
12-18
[B]
[C]
G912I507.WMF
SM