Ricoh G035 Service Manual page 510

PHOTOCONDUCTOR UNIT (PCU) AND DEVELOPMENT UNIT
6.2 PHOTOCONDUCTOR UNIT (PCU) AND
DEVELOPMENT UNIT
⇒
1. Open the right cover and front cover.
2. Pull the PCU and development unit [A]
out slightly while pushing the release
lever [B].
[C]
Ensures that the shutter will
remain in the open position.
6.3 PHOTOCONDUCTOR UNIT (PCU)
6.3.1 PCU
1. Pull out the PCU and development unit. (See Photoconductor Unit and
Development Unit.)
2. Remove the PCU [A] (2 screws) from the development unit [B].
G035
P C U
Shutter
Development Unit
[A]
NOTE: Make sure that the toner
supply shutter [C] is at the
open position before
reinstalling the unit.
G035R552.WMF
6-6
Rev. 09/2000
[B]
[A]
G035R554.WMF
[B]
SM